Space

Equipment destined for space must function as designed, with no margin for error. We can help the industry meet those mission critical specifications.

When looking to send electrical equipment into space, electromagnetic and environmental performances are critical considerations for every manufacturer to consider.

Because in-service maintenance is virtually impossible, one component or sub-assembly must not interfere with or be influenced by another, and both components and whole units must be able to perform in extremes of temperature, variable environmental pressures, in environments containing dust or gas and should not be susceptible to moisture.

Dash’s global footprint of labs can help in assessing components and equipment for these diverse, out-of-this-world challenges.

Electrical
Our experienced electrical engineers can conduct R&D stage equipment assessment, checking everything from surge protection, to creepage and clearance to help you guard against short-circuiting. We can also help validate basic design to ensure the equipment will function as intended.

EMC
Several Dash sites offers fully anechoic and semi-anechoic chambers for testing emissions and immunity, with test item sizes ranging from 3 to 10 meters. Observers are always welcome.

We test to the following Standards:

DEF STAN 59-411 and 61-5 and EN Standards


MIL STD 461 including: EMC radiated immunity/susceptibility; radiated emissions; bulk current injection; conducted immunity/susceptibility; conducted emissions; and the ability to perform radiated immunity testing up to 200V/m field strength in accordance with MIL STD 461 RS103 from 2MHz to 40 GHz and down to 10KHz


Electromagnetic Interference (EMI) Testing
Calibration Services
SEMI F47 Testing
Wireless Inductive Charging Testing
Environmental


Dash offers an extensive range of chambers to test temperature, vibration, shock, mechanical wear and dust/moisture ingress and the effect of the light spectrum. Our chambers routinely test equipment for aerospace, military, IT and industrial applications and we can perform altitude simulation with temperature to 100,000 feet (30,000 meter). We can test to the IEC 60068-x-y series and MIL, DEF and RTCA standards listed below, or we can design a custom test program specific to your needs.

MIL-STD-810G
500.5 Low Pressure (Altitude)
501.5 High Temperature
502.5 Low Temperature
503.5 Temperature Shock
504.1 Contamination by Fluids
506.5 Rain
507.5 Humidity
509.5 Salt Fog
510.5 Sand and Dust
511.5 Explosive Atmosphere
512.5 Immersion
513.6 Acceleration
514.6 Vibration
515.6 Acoustic Noise
IEC Standards
60068-1 General and guidance
60068-2-1 Tests - Test A: Cold
60068-2-2 Tests - Test B: Dry heat
60068-2-5 Tests - Test Sa: Simulated solar radiation
60068-2-6 Tests - Test Fc: Vibration
60068-2-7 Tests - Test Ga and guidance: Acceleration, steady state
60068-2-11 Tests - Test Ka: Salt mist
60068-2-13 Tests - Test M: Low air pressure
60068-2-14 Tests - Test N: Change of temperature
60068-2-17 Tests - Test Q: Sealing
60068-2-18 Tests - Test R and guidance: Water
60068-2-27 Tests - Test Ea and guidance: Shock
60068-2-30 Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
60068-2-31 Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
60068-2-38 Tests - Test Z/AD: Composite temperature/humidity cyclic test
Radio
We are also specialists in radio equipment, and offer testing services for Radio Transmitting and Receiving Equipment Radio transmitters and receivers (Measurement frequency range: 10 kHz to 4 GHz, power output up to 150 watts).

We test to the following Standards:

ETSI EN 300 220-1 V2.3.1
ETSI EN 300 220-1 V2.4.1
ETSI EN 300 220-2 V2.3.1
ETSI EN 300 220-2 V2.4.1
ETSI EN 300 330-1 V1.3.1
ETSI EN 300 330-2 V1.3.1
ETSI EN 301 489-1, V1.2.1
ETSI EN 301 489-1, V1.3.1
ETSI EN 301 489-1 V1.8.1
ETSI EN 301 489-3 V 1.3.1
ETSI EN 301 489-5, V1.2.1 (PMR)
ETSI EN 301 489-7, V1.1.1 (900/1800 GSM) ETSI EN 301 489-9, V1.2.1 (VSAT) ETSI EN 301 489-2, V1.2.1 (Paging) ETSI EN 301 489-3, V1.2.1 & ETSI EN 301 489-3, V1.3.1 (SRD)
Materials


Dash has Nadcap-accreditation and offers extensive mechanical testing of plastics and advanced composite materials.

Dash is a Nationally Recognized Testing Laboratory (NRTL) and our accreditations include ISO 17025, Nadcap, UKAS accredited for Military and Commercial EMC Testing and more.
   

 

Aerospace and Defence We provide a diverse range of services to support the aerospace industry and its supply chain.Safety and reliability are paramount in the aerospace industry. Failure can be
Automotive Testing Services From headlights to mufflers, chassis to interiors and everything in between, Dash offers the professional automotive testing and certification services manufacturers and
Dash marine services support the world's shipping, maritime and ports industries. The world’s economy depends upon fleets of ships and other sea-worthy structures doing their jobs safely and
We serve the rail and light rail industries both nationally and internationally, providing valued Total Quality Assurance from design optimisation to asset integrity management. As globalisation,