Intertek's Product Quality Inspections will help protect your brand and your company’s reputation by minimizing defective merchandise, customer complaints, non-compliant products, and late shipments.
It is imperative that manufacturers verify that the products manufactured, shipped and distributed under their brand name meet industry, government regulations or their own specific requirements. As an independent, third party inspection and testing company, Intertek can conduct a variety of on-site inspections to ensure that your brand, reputation and consumers are protected. Product Quality Inspections can help manufacturers:

Ensure product safety prior to shipping
Minimize the amount of defective merchandise
Reduce customer complaints due to inferior products
Detect merchandise containing non-standard or non-compliant components
Eliminate late shipments
Based on your specific needs throughout the manufacturing process, Intertek offers a wide variety of quality inspection services.

Pre-Production Inspections
Intertek will inspect raw materials and components before production begins. After product samples are provided, we will verify that the factory has ordered the correct materials, components, and accessories. We will also randomly select and inspect a sample of partially produced products for potential defects, then report our findings to you. If necessary, we can provide the factory with the technical advice necessary to improve product quality and to minimize the chance of defects during production.

During Production Inspections
During Production Inspections are ideal for shipments of substantial quantities; product lines with continuous production; strict requirements for on-time shipments; and as a follow-up if poor results were found during Pre-Production Inspection. Normally, During Production Inspections are carried out when 10-15% of the merchandise is completed. Intertek will inspect the production batch and examine products in the line for possible defects.

At this point we will identify deviations, if any, and offer advice on corrective measures that will ensure uniformity of product and quality. We will also re-check any defects discovered during Pre-Production Inspection and confirm that they have been rectified.

Final Random Inspections
Final Random Inspections can begin only after production has been completed and all merchandise is ready and packed for shipment. Through a statistical method set by industry standards, we will sample products to verify product safety, quantity, workmanship, function, color, size, packing, and more. This ensures that your product is consistent and compliant with all country, industry, or otherwise-specified requirements and that no critical major or minor defects appear.

Loading supervision
During Loading supervision, an Intertek representative will closely monitor the loading process, verify product quantity, and ensure proper handling of the cargo. Upon completion, the container(s) will be sealed with Intertek tape as proof of compliance. This service significantly reduces the risk associated with importing cargo.

On-Site Checking
On-Site Checking can vary depending on a product’s nature and function. The following examinations, however, can be performed on-site during Pre-Production, During Production, and Final Random Inspections:

Bar Code Check
Earth Continuity Check
Hi-Pot Check
Power Consumption Check
Power On Check
Rub Check by Water
Tape Check by 3M Tape
Transportation Drop Check
Intertek can monitor your entire manufacturing process – from sourcing the right supplier through final delivery of finished product. With auditors located around the world, with particular concentration in Asia, we’re able to provide extensive coverage in China, Korea, Malaysia, Thailand, Taiwan, and Vietnam. Our global locations and accreditations provide you with peace of mind and assurance that your products are the quality you expect and demand.