Building Accessories

Building Accessories

Building Accessories and special buyouts (SBO’s)include sliding doors, rollup doors, personnel doors, fiberglass insulation, sandtrap louvers, windows, ridges ventilators. Some are produced in-house. Some are purchased from suppliers and included in our single source supply.

Insulation
  • Insulation is typically fiberglass blanket of stable and uniformly textured inorganic glass fiber bonded together by a non-water soluble and fire retardant thermosetting resin.
  • Standard insulation thickness is 50 mm; higher thicknesses (75 mm and 100 mm) are available upon request.
  • Standard insulation facing is White Metalized Scrim Kraft (WMSK).
  • The standard nominal insulation density shall be 12 kg/m3 with a thermal conductivity of 0.041 w/mk at mean temperature of 25 0C. Higher densities (16 kg/m3 and 24 kg/ m3) are available upon request.
Personnel Doors
  • The frames of horizontal steel sliding doors are manufactured from 1.5 or 2.0 mm (nominal) thick x 200 mm deep cold formed channels and are delivered knocked down packages for field assembly are provided.
Steel Sliding Doors
  • The frames of horizontal steel sliding doors are manufactured from 1.5 or 2.0 mm (nominal) thick x 200 mm deep cold formed channels and are delivered knocked down packages for field assembly are provided.
Steel Roll-Up Doors
  • The roll-up door curtain is cold formed from variable thickness white polyester painted galvanized steel. The bottom rail of the door curtain is an extruded aluminum angle guide.
  • Standard Roll-Up Door Sizes are 3000 x 3000, 4000 x 4000, 5000 x 5000 and 6000 x 6000. In between sizes can be accommodated.
Windows
  • Window frames are made of powder coated aluminum extrusions in Frost White color only. They are horizontal half slide type (fixed type is optional), 1000 mm high and 1000 mm wide (other sizes are optional). Windows are factory glazed with 6mm thick clear glass and are equipped with latches and removable insect screens.
Sand Trap Louvers
  • Standard sand trap louvers are 1000 mm wide x 1000 mm high (other sizes are optional). They are supplied with vanes and framing. They are made from 0.7 mm (nominal) polyester painted Aluzinc Coated Steel sheet in any Mabani Steel Standard Colors.
Gravity Ventilators
  • Gravity ridge ventilators are 3000 mm long with a throat opening of 300 mm or 600 mm. 300 mm (throat opening) ventilators are equipped with dampers and are available in fresh White color only. 600 mm (throat opening) ventilators are supplied without dampers and are available in any standard Mabani Steel Color. Ventilators are installed as either individual units or as continuous (joined) units. The outer skin of both types of ventilators is made from 0.7 mm thick polyester painted Aluzinc Coated Steel. Both sizes are supplied with bird screens and shipped knocked down.
Fiber Glass Roof Curbs
  • Roof curbs are made of 3 mm thick fiberglass reinforced polyester and coated with a weathering surface on the outside face.

Panel & Panel Accessories

Panels & Panel Accessories include single skin panels, sandwich panels, trims and flashing, panels standard buyouts and building accessories. Although all roofs have panels, walls are often partially or fully open for blockwall, precast panels or access.

  • Single Skin Panels are trapezoidal ribbed sheets roll formed from thin mill finish or prepainted aluzinc coated steel and aluminum coils and cut-to-length to meet the requirements of a specific building.
  • Sandwich Panels have a polyurethane foam core sandwiched between two single skin metal panels (or an exterior single skin metal panel and an interior aluminum faced laminate). Mabani Steel does not produce sandwich panels but has an exclusive arrangement, with the largest producer of sandwich panels in the UAE, for the purchase and resale of sandwich panels, to provide its Customers with a single source supply responsibility. The engineering drawings for the sandwich panels are done by Mabani Steel so are the production of trims and the supply of all sandwich panels accessories such as fasteners, bead mastic, purlin tape, etc.

Need help or have a question?

UAE:
+971508692438
INDIA:
+919825164743
Basic Building Parameters  The basic parameters that define a pre-engineered building are: Building width, Building length, Building height, Roof slope, End bay length, Interior bay length and
Single Skin Panels  The panels used in the construction of DASHPROJECTS Pre-Engineered Buildings are composed of the following: Base metal of either Galvalume coated steel conforming to ASTM
Steel Joists  Open web steel joist (OWSJ) is a lightweight steel truss consisting, in the standard form, of parallel chords and a triangulated web system, proportioned to span between bearing
The engineering section employs a team of design and detailing engineers equipped with the latest and most advanced software for both disciplines. All works are closely monitored to ensure that it
  Steel Fabrication ASSENT is one of the leading steel fabrication company in Dubai. We deliver experienced and dependable steel manufacturing and fabrication solutions for
  Steel Erection With over a decade of experience and a team of industry experts, ASSENT is a trusted Steel Erection Company in Dubai, UAE. We aim to provide a complete,
ASSENT provides top-of-the-line structural steel fabrication services. ASSENT works with the best designers and engineers to ensure that all projects meet high standards of excellence and to provide
The components of a Pre-engineered building (PEB) are manufactured at our plant according to the carefully engineered design, drawn as per the client’s specific project requirements. This
Cladding ASSENT is one of the largest manufacturers of cold-rolled steel frame structures in the Middle East. We offer a wide range of panels and profiles to suit the industrial and commercial needs
EBS is capable of designing all kind of high complex steel structures such as high rise buildings, airport terminal buildings and industrial structures for process, petroleum and power plant
EBS has a total site area of 140,000 sq/m including 45,000 sq/m of covered fabrication area and 70,000 sq/m of storage area with the capacity to produce in excess of 70,000t of fabricated steelwork
Since the formation of Emirates Building Systems in 1997, Emirates building Systems has developed an excellent reputation and strong presence as one of the regional’s premier steel fabricator
Industrial Structures and Buildings. Its design capacity, its substantial resources, its considerable output, its commitment to service make EBS a choice supplier for large industrial and
Pre-engineered buildings are defined by the following geometrical parameters: Building width, Length, Eave height, Roof slope, Sidewall bay spacing, end wall bay spacing and main frame module
Mezzanine A mezzanine is an elevated floor for use as office or store area. The mezzanine framing is connected to main frame and intermediate columns for support. The mezzanine framing consists of
EBS offers profile to suit structural, architectural, thermal lighting and corrosive circumstances. Structural constraints are satisfied by the range of corrugation spacing, thickness and materials
EBS also offers steel deck for steel buildings or mezzanines to suit structural specifications. There are two profiles available in EBS production line; they are EBS50X225 and EBS75X300 with covering
EBS offers fabrication and supply of crane bridge girders for over head cranes. Most girders are from plate formed box section. EBS plant is well equipped with advance fabrication facilities for
On the Middle-East and Regional scale of the Construction Business, CSCEC ME L.L.C. has been a world class leaders and has executed in some of the complex projects of various specialised disciplines
  General  Contracting In normal traditional engagement for project deliverables in the construction industry where the Owner engages the Designer and Contractor separately, CSCEC-ME
China State Construction Engineering Corporation Middle East (CSCME) Infrastructure Division has been operating in the region since 2006, in these 6 years the division has added significant strength
China State Construction Engineering Corporation Middle East (CSCME) Mechanical, Electrical and Plumbing (MEP) division has been operating in UAE since 2003 along with the core CSCME’s building
The unit of measure of hot rolled structures (structural steel) is the metric ton (MT). Hot Rolled Steel Structures applications include Multi Storey low rise buildings, equipment
Mabani erection team is comprises of highly qualified and well trained site engineers and safety officers. The team has completed more than 500 projects in the GCC, Meddle & Far
Blast & Paint Mabani state of the art blasting, painting & material handling system produce the highest quality with most enduring coating finish. Mabani has the most advanced and
The basic parameters that define a pre-engineered building are: Building width, Building length, Building height, Roof slope, End bay length, Interior bay length and Design loads. Width Length
Zamil Steel pre-engineered buildings are custom-designed to meet your exact requirements. The most common Primary Framing systems are shown below. Practically any frame geometry is possible. Consult
Purlins, girts and eave struts are secondary structural members used to support the wall and roof panels. Purlins are used on the roof; girts are used on the walls and eave struts are used at the
Nearly 70% of all single storey non-residential construction now utilizes preengineered buildings. Applications range from small car parking sheds to 90 m (+), wide clear span aircraft hangars to
The panels used in the construction of Zamil Steel Pre-Engineered Buildings are composed of the following: Base metal of either Galvalume coated steel conforming to ASTM A 792M Grade 345B or
Liner panels have one metal skin surface with polystyrene foam board adhered to it for better insulation. In the past 20 years, end-users, contractors and consultants have become increasingly aware
Eave gutters, downspouts, curved eaves, wall flashings and trims are produced from the same material (base metal, thickness, substrate coating, paint finish and color) as the wall panels of the
Drawings Zamil Steel produces its own shop drawings for the fabrication of your steel joists, trusses, structural steel components, steel deck and girts. For project design, bid preparation or
Open web steel joist (OWSJ) is a lightweight steel truss consisting, in the standard form, of parallel chords and a triangulated web system, proportioned to span between bearing points. The main use
Steel Decks  Steel deck is a cold formed corrugated steel sheet supported by steel joists or beams. It is used to support concrete or insulating membrane of a roof. Zamil steel decks are
Combining Hambro steel joists with poured concrete, the system consists of hybrid concrete/steel T-beams running in one direction and an integrated continuous slab in the other (see drawing below).