Basic Building Parameters
The basic parameters that define a pre-engineered building are: Building width, Building length, Building height, Roof slope, End bay length, Interior bay length and
Steel Joists
Open web steel joist (OWSJ) is a lightweight steel truss consisting, in the standard form, of parallel chords and a triangulated web system, proportioned to span between bearing points.
The main use of an OWSJ is to provide support for roof or floor deck and to transfer the load imposed on the deck to the structural frames (beam and column). Using a steel joist and steel deck system for floor and roof construction has proven to be an effective solution resulting in substantial savings.
Over the years, we have established strict quality standards. All our welders, inspectors, and quality assurance technicians are certified. Zamil Steel can design and manufacture steel trusses for a wide variety of special needs and specifications.
Zamil Steel uses state-of-the-art software for the design of our products, and can accommodate many special design requirements including:
- Point loads, Moving loads
- Snow drifts, End moments, Axial loads and Slopes
Quality
Zamil Steel is committed to providing a high quality product that exceeds project requirements. All our raw material is certified to exacting standards, our welders are certified, and all of our work is rigorously inspected before it leaves the plant.
As a leader in the joist industry Zamil Steel has hundreds of thousands of steel joists in service - supporting the floor and roofs of schools, factories, warehouses, stores and countless other structures throughout the country.
The shape of the joist may depend on its use and the type of roofing system requested.
Accessories
To provide lateral support during construction, or for other special needs, Zamil Steel provides a full range of joist accessories including:
- Horizontal bridging
- Diagonal bridging (welded or bolted)
- Knee Braces
- Joist Substitutes
- Headers
- Extensions
Extensions
An extension designates a continuances beyond the normal bearing of the joists. The extension can be the top chord only or the full depth of the joist, in which case, it is referred to as a cantilever joist.
Using Zamil Steel joist and deck system for flooring and roof construction
has proven itself to be a most advantageous solution.
- Efficiencies of high-strength steel
- Speed and ease of erection
- Low self-weight of roof and floor for smaller columns and foundations
- Increased bay dimensions, reducing the numbers of joists and columns
- Simplifying building erection
- Greater floor plan layout flexibility
- Maximum ceiling height by installing of ducts through the joist web systems
- Easy adaptation to acoustical insulation systems
- Floor and roof composition having long-term resistance to fire (As established by underwriters laboratories)
Single Skin Panels
The panels used in the construction of DASHPROJECTS Pre-Engineered Buildings are composed of the following:
Base metal of either Galvalume coated steel conforming to ASTM
Steel Joists
Open web steel joist (OWSJ) is a lightweight steel truss consisting, in the standard form, of parallel chords and a triangulated web system, proportioned to span between bearing
The engineering section employs a team of design and detailing engineers equipped with the latest and most advanced software for both disciplines. All works are closely monitored to ensure that it
Steel Fabrication
ASSENT is one of the leading steel fabrication company in Dubai. We deliver experienced and dependable steel manufacturing and fabrication solutions for
Steel Erection
With over a decade of experience and a team of industry experts, ASSENT is a trusted Steel Erection Company in Dubai, UAE. We aim to provide a complete,
ASSENT provides top-of-the-line structural steel fabrication services. ASSENT works with the best designers and engineers to ensure that all projects meet high standards of excellence and to provide
The components of a Pre-engineered building (PEB) are manufactured at our plant according to the carefully engineered design, drawn as per the client’s specific project requirements. This
Cladding
ASSENT is one of the largest manufacturers of cold-rolled steel frame structures in the Middle East. We offer a wide range of panels and profiles to suit the industrial and commercial needs
EBS is capable of designing all kind of high complex steel structures such as high rise buildings, airport terminal buildings and industrial structures for process, petroleum and power plant
EBS has a total site area of 140,000 sq/m including 45,000 sq/m of covered fabrication area and 70,000 sq/m of storage area with the capacity to produce in excess of 70,000t of fabricated steelwork
Since the formation of Emirates Building Systems in 1997, Emirates building Systems has developed an excellent reputation and strong presence as one of the regional’s premier steel fabricator
Industrial Structures and Buildings.
Its design capacity, its substantial resources, its considerable output, its commitment to service make EBS a choice supplier for large industrial and
Pre-engineered buildings are defined by the following geometrical parameters: Building width, Length, Eave height, Roof slope, Sidewall bay spacing, end wall bay spacing and main frame module
Mezzanine
A mezzanine is an elevated floor for use as office or store area. The mezzanine framing is connected to main frame and intermediate columns for support. The mezzanine framing consists of
EBS offers profile to suit structural, architectural, thermal lighting and corrosive circumstances. Structural constraints are satisfied by the range of corrugation spacing, thickness and materials
EBS also offers steel deck for steel buildings or mezzanines to suit structural specifications. There are two profiles available in EBS production line; they are EBS50X225 and EBS75X300 with covering
EBS offers fabrication and supply of crane bridge girders for over head cranes. Most girders are from plate formed box section. EBS plant is well equipped with advance fabrication facilities for
On the Middle-East and Regional scale of the Construction Business, CSCEC ME L.L.C. has been a world class leaders and has executed in some of the complex projects of various specialised disciplines
General Contracting
In normal traditional engagement for project deliverables in the construction industry where the Owner engages the Designer and Contractor separately, CSCEC-ME
China State Construction Engineering Corporation Middle East (CSCME) Infrastructure Division has been operating in the region since 2006, in these 6 years the division has added significant strength
China State Construction Engineering Corporation Middle East (CSCME) Mechanical, Electrical and Plumbing (MEP) division has been operating in UAE since 2003 along with the core CSCME’s building
The PEB Steel Structure of a Pre-Engineered Steel Building generally accounts for over 80% of the weight of the Pre-Engineered Steel Building. This 80% is an average and may change plus or
The unit of measure of hot rolled structures (structural steel) is the metric ton (MT). Hot Rolled Steel Structures applications include Multi Storey low rise buildings, equipment
Building Accessories and special buyouts (SBO’s)include sliding doors, rollup doors, personnel doors, fiberglass insulation, sandtrap louvers, windows, ridges ventilators. Some are
Mabani erection team is comprises of highly qualified and well trained site engineers and safety officers. The team has completed more than 500 projects in the GCC, Meddle & Far
Blast & Paint
Mabani state of the art blasting, painting & material handling system produce the highest quality with most enduring coating finish. Mabani has the most advanced and
The basic parameters that define a pre-engineered building are: Building width, Building length, Building height, Roof slope, End bay length, Interior bay length and Design loads.
Width
Length
Zamil Steel pre-engineered buildings are custom-designed to meet your exact requirements. The most common Primary Framing systems are shown below. Practically any frame geometry is possible. Consult
Purlins, girts and eave struts are secondary structural members used to support the wall and roof panels. Purlins are used on the roof; girts are used on the walls and eave struts are used at the
Nearly 70% of all single storey non-residential construction now utilizes preengineered buildings. Applications range from small car parking sheds to 90 m (+), wide clear span aircraft hangars to
The panels used in the construction of Zamil Steel Pre-Engineered Buildings are composed of the following:
Base metal of either Galvalume coated steel conforming to ASTM A 792M Grade 345B or
Liner panels have one metal skin surface with polystyrene foam board adhered to it for better insulation. In the past 20 years, end-users, contractors and consultants have become increasingly aware
Eave gutters, downspouts, curved eaves, wall flashings and trims are produced from the same material (base metal, thickness, substrate coating, paint finish and color) as the wall panels of the
Drawings
Zamil Steel produces its own shop drawings for the fabrication of your steel joists, trusses, structural steel components, steel deck and girts. For project design, bid preparation or
Steel Decks
Steel deck is a cold formed corrugated steel sheet supported by steel joists or beams. It is used to support concrete or insulating membrane of a roof.
Zamil steel decks are
Combining Hambro steel joists with poured concrete, the system consists of hybrid concrete/steel T-beams running in one direction and an integrated continuous slab in the other (see drawing below).