ROOF & WALL PANELS
ROOF & WALL (AVAILABLE IN ALL REGIONS)
DASH standard steel panels are 0.5 mm or 0.6 mm thick and have a minimum yield strength of 345 MPa. Steel panels are hot dipped and galvanized with zinc or zinc-aluminium coating. Galvanized materials conform to G90 for 275 grams per square metre according to ASTM A653. Zinc-Aluminium coated materials conform to AZ150 according to ASTM A792.
DASH panels are prepared with a multilayered coating system to ensure long life and optimum coating adherence. The base material is pretreated, before applying a corrosion resistant primer and top coat. The combined thickness of the painted film is 25 microns on the front side and 12 microns on the reverse side.
DASH RIB / ROOF (KR)
DASH Roof profile is strong and cost effective and was developed specifically for roofing applications. The bearing leg design permits easier installation and maintenance, supports thicker layers of insulation and allows easier curvature for a visually appealing finish.
| Coverage Arear | : | 1000 mm | Rib Depth | : | 32 mm |
DASH WALL (KW)
DASH Wall is a cost effective, partially concealed fastener panel with a sculptured valley shape between the major ribs for a superior architectural look for external walls.
| Coverage Arear | : | 1000 mm | Rib Depth | : | 26 mm |
CONCEALED FASTENER (MIDDLE EAST & AFRICA REGION ONLY)
Concealed Fastener Single Skin Cladding (TYPE KC)
The concealed fastener single skin cladding type KC is used for exterior wall cladding and internal wall and roof liners. The panels have interlocking tongue and groove joints. The standard panels are available in 0.6 mm nominal thickness.
Concealed Fastener Sandwich Panel Cladding (Type KCIP)
The DASH concealed fastener insulated panel cladding system KCIP consists of insulated panels with generally flat outer and inner facings. The panels have interlocking tongue and groove joints with fasteners concealed within the joints. The specification of the panel facings is same as for single skin KC panels. This system has very low heat transmission values, a high strength to weight ratio and are quick to assemble, hence provide a cost effective solution on a wide range of cladding applications.
STANDING SEAM ROOF SYSTEMS
KSS 600 (India Region Only)
DASH Standing Seam Panel systems (KSS-600), with double lock standing seam, eliminates the risk of leakage at fasteners at side and end provides excellent protection in all weather conditions. It assures consistent weather tightness with virtually maintenace free performance for many years.
The KSS-600 roof system is the most specified seam roof system in the market since many DASH's KSS-600 Standing Seam Roof System has received the prestigious Factory Mutual Approval (FM approval) from USA. The FM approval is a certification for the high product quality and reliability of this roofing system.
KSS 450 (India and South East Asia region only)
DASH DECK
DASH Deck Panels are used in high rise buildings, office buildings and mezzanine floors in industrial buildings and warehouses. These decks can be used as a permanent shuttering to support the wet concrete and help in creating composite slabs and floor beams. The continuous flange stiffeners and deep embossments increase the load carrying capacities. They provide for a stable and rigid working platform without any need of propping. These panels are roll formed from hot dip galvanized coils of 345 MPa with thickness starting from 0.6 mm to 1.2 mm.
DASH Deck with 40 mm and 41 mm depth (Middle East & Africa region only)
DASH Deck with 54 mm depth & DASH Deck with 75 mm depth (India region only)
DASH Deck with 55 mm depth (South East Asia region)
CURVED CLADDING
This type of cladding uses the DASH Roof profile with width coverage of 1 m and a variable curve radius. They also add an extra advantage to the aesthetics of the building.
DASH STANDARD COLORS
Arctic White, Caribbean Blue, Desert Beige, Sun Gold, Autumn Green, Galvalume/AluZinc
