Overview

Overview

PRODUCTS



Pipes



Plates & Coils

PIPES

The matrix below gives a structured sense of WCL's range and prowess.
Scroll down below to discover more about our portfolios and the specifications from each location.

  HFW/ERW L-SAW H-SAW BENDS COATING*
INDIA          
SAUDI          
USA          
*Pipe Coating Available:

  • External 3- Layer Polyethylene (3LPE)
  • Polypropylene Systems (3LPP)
  • Single & Dual layer Fusion Bonded Epoxy (FBE/DFBE)
  • Internal Solvent base coating (Flow Coat)

  • Internal Solvent free coating (Flow Coat)
  • Coat Tar Enamel (CTE)
  • Concrete Weight Coating
  • Inside Cement Mortar Lining

ERW

Anjar: 1,50,000 MTPA

Length

6 m - 18 m

Wall Thickness

2 mm - 12.7 mm

Outer Diameter

1 ¼ inch - 16 inch

Grade

Upto API 5L X-70 and above

LONGITUDINAL SUBMERGED ARC WELDED (L SAW)

Dahej: 3,50,000 MTPA
Anjar: 3,50,000 MTPA

Length

up to 18 m

Wall Thickness

6 mm to 65 mm

Outer Diameter

16 inch to 60 inch

Grade

up to 5L X-70 and above

HELICALLY SUBMERGED ARC WELDED (H-SAW)

Anjar: 3,80,000 MTPA
Dahej: 50,000 MTPA
Mandya: 1,50,000 MTPA
Bhopal: 1,75,000 MTPA

Length

up to 18 m (TRL)

Wall Thickness

5 mm to 27 mm

Outer Diameter

18 inch to 140 inch

Grade

up to API 5L-X70 and above

BENDS

Anjar, India: Hot Pulled Induction Bends, 39000 Number of Bends

Pipe Diameter

6 inch to 60 inch

Bend Angle

0-180 degrees

Max Arc Length

9,800 mm

Thickness

Up to 50 mm

*Radius: Min 841 mm for 5D of 6 inch OD and Max 6400 mm for 6D of 60 inch OD

COATING

Anjar: 13.45 million sq. m
Dahej: 5 million sq. m.

Annual Capacity

18.45 Mn SQM

External Coating Pipe Diameter

2 inch – 140 inch

Internal Coating Pipe Diameter

6 inch – 140 inch

Pipe Length

9 m to 18.2 m

HELICALLY SUBMERGED ARC WELDED (H-SAW)

Dammam: 3,75,000 MTPA

Length

8 m - 18 m

Wall Thickness

6 mm - 25.4 mm

Outer Diameter

18 inch - 100 inch

Grade

Upto API 5L X-70 and above

COATING

Dammam: 4.5 million sq. m.

Annual Capacity

4.5 Mn SQM

External Coating Pipe Diameter

4 inch – 120 inch

Pipe Length

10 m to 24 m



Capability to do a DJ to offer 24 m

HFW

Little Rock Arkansas: 1,75,000 MTPA

Length

8.5 m - 24 m

Wall Thickness

4 mm - 14 mm

Outer Diameter

168.3 mm - 508 mm

Grade

Upto API 5L-X-70 and above, J55 and equivalent

HELICALLY SUBMERGED ARC WELDED (H-SAW)

Little Rock, Arkansas: 3,50,000 MTPA

Length

10.3 m - 24.3 m

Wall Thickness

8 mm - 25 mm

Outer Diameter

24 inch - 60 inch

Grade

Upto API 5L X-70 and above

COATING

USA: 9.1 million sq. m.

Annual Capacity

9.10 Mn SQM

External Coating Pipe Diameter

4 inch – 60 inch

Internal Coating Pipe Diameter

16 inch – 60 inch

Pipe Length

10 m to 24.5 m



Capability to do a DJ to offer 24 m

PLATES & COILS

Plate & Coil Mill Division

Commissioned in September 2007, with an annual rolling capacity of 1.5 million tones, Welspun’s Plate and Coil Mill division has been in the mainstay in API line pipe standard, producing high grade steel plates, coils and also supplying commercial grade products.

 

PLATES

Width

1500mm - 4500mm

Thickness

8mm-140mm

Length

6000mm - 18000mm

Single Plate Weight

up to 35 ton

COILS

Thickness

8mm – 25 mm

Width

1500mm – 2800 mm

Single Coil Weight

up to 50 Ton

PLATE AND COIL MILL FACILITIES

  • 200 Ton Stein Heurtey  Digital Re-heating furnace with Level-2 model
  • 11MW Single stand Reversible Steckle Mill attached with Vertical Edger
  • 60 meter long accelerated cooling system
  • 2500 KW Down coiler
  • 60 Meter Long plate cooling bed
  • 100 % Body UT Machine 
  • Edge Milling Machine
  • State Of Art - Fully Loaded  Material Testing Laboratory
  • Bogie Hearth Normalizing Furnace 

 

Seamless pipes is a term used to define the process,that does not have any welding seam. The presence of any seam on a welded tube acts as a weak point, however if the tube is seamless, it tends to
API 5L Line Pipe Manufacturing Process : High Frequency Welding External Diamter: 21.3mm To 168.3mm (0.840" To 6.625") Grade: PSL 1 - Grade A To X 70 (L210 To L485)PSL 2 -
AS/ NZS 1163 Manufacturing Process: High Frequency Welding External Diamter: 20x20mm To 125x125mm Grade: C250 / C250L0C350 / C350L0C450 / C450L0 Wall Thickness:
AS/ NZS 1163 Manufacturing Process: High Frequency Welding External Diamter: 50x20mm To 150x100mm Grade: C250 / C250L0C350 / C350L0C450 / C450L0 Wall Thickness:
Shouldered End Pipe Manufacturing Process: High Frequency Welding External Diamter: 60.3mm To 165.1mm Grade: ASTM A53 B/ ASTM A 106 B/ AS 1074 Wall Thickness: 2.Omm
AS/ NZS 1163 Manufacturing Process: High Frequency Welding External Diamter: 50x20mm To 150x100mm Grade: C250 / C250L0C350 / C350L0C450 / C450L0 Wall Thickness:
Metal Bar 410 Stainless Steel Bar Aluminium-flat metal bar Copper-bar Duplex-round Metal Bar Duplex-Steel Metal Bar Inconel-round Metal Bar
Metal Plate Alloy-steel-plate Carbon-steel-plate Hastelloy-plates Hastelloy-plates Monel-plate Nickel-plate Nickel-plate
Metal Sheet Alloy-steel-sheets Aluminum sheet Carbon-steel-sheet Copper-sheet Duplex-Steel Sheet Stainless-steel-sheet Titanium-plate
Metal Tee Stainless steel tee Stainless steel equal tee Stainless-steel-reducing-cross Sstainless-steel-unequal-tee Titanium Tee
Stainless Steel Coils 304 Stainless Steel Coils Stainless Steel Coils Polished Stainless Steel Coils
Metal Pipe 304 stainless steel 316 round stainless steel 321 stainless steel pipe Copper-pipe
Seamless pipes is a term used to define the process,that does not have any welding seam. The presence of any seam on a welded tube acts as a weak point, however if the tube is seamless, it tends
C.S. ERW Pipes upto 24″in Schedules 10/20/STD/40/XS Grade: API 5L  B / ASTM A53 GR.B / PSL1 / NACE MR 01-75 Origin: HYUNDAI / SEAH STEEL –
C.S. LSAW Pipes from 18″ to 48″ in Schedule 40/STD/60/XS/80 Grade: API 5L Gr.B/X42/X52/X60 PSL1/PSL2 / NACE MR 01-75 Origin: JFE-JAPAN  
 Round Pipes API 5L Line Pipe API 5CT Tubing ASTM A 53 GrA ASTM A53 Gr.B ASTM A53 -SCH80 ASTM A 135 GrA & Gr.B ASTM A 795 Gr.A AS 1074 BSEN39 EN 10255 EN 10217 - 1 SANS
 Square Tubes AS/ NZS 1163 EN 10219 - 1&2 ASTM A500  Rectangular Tubes AS/ NZS 1163 EN 10219 - 1&2 ASTM A500  Specialized Products Shouldered
 Rectangular Tubes AS/ NZS 1163 EN 10219 - 1&2 ASTM A500  Specialized Products Shouldered End Pipe Black & Galvanized Rolled Grooved pipes Water Based Blue
 Specialized Products Shouldered End Pipe Black & Galvanized Rolled Grooved pipes Water Based Blue Painted SHS & RHS Water Based Red Painted Pipes Black & Galvanized
ROUND PIPES ASTM A53/A53M ASTM A135/A135M ASTM A795/A795M ASTM A500/A500M BS EN 10255 BS EN 10219 BS 1387 AS/NZS 1163 AS 1074 API Spec. 5L API Spec. 5CT SQUARE TUBES ASTM A500/A500M
SQUARE TUBES ASTM A500/A500M BS EN 10219 AS/NZS 1163 ASTM A500/A500M Manufacturing Process: High Frequency Welding External Diameter: SHS - 40x40mm to 250x250mm
RECTANGULAR TUBES ASTM A500/A500M BS EN 10219 AS/NZS 1163 ASTM A500/A500M Manufacturing Process: High Frequency Welding External Diameter: RHS - 60x40mm to 300x200mm
SPECIALIZED PIPES & TUBES Shouldered Pipes Black & Galvanized Rolled Grooved Pipes Water Based Blue Painted Tubes Shouldered Pipes Manufacturing Process: High
DashTrading PIPING HAS A VAST ARRAY OF MILL-RUN DELIVERIES AND INVENTORY OF CARBON STEEL PIPES, FITTINGS, FLANGES, AND RELATED PRODUCTS. We provide the most
Dashtrading PIPING HAS A VAST ARRAY OF MILL-RUN DELIVERIES AND INVENTORY OF STAINLESS PIPES, FITTINGS, FLANGES, AND RELATED PRODUCTS. We provide the most reliable materials
Dash trading PIPING HAS A VAST ARRAY OF MILL-RUN DELIVERIES AND INVENTORY OF LOW-TEMPERATURE CARBON STEEL PIPES, FITTINGS, FLANGES, AND RELATED PRODUCTS.
Dash Trading PIPING HAS A VAST ARRAY OF MILL-RUN DELIVERIES AND INVENTORY OF NICKEL ALLOY PIPES, FITTINGS, FLANGES, AND RELATED PRODUCTS. We provide the
DashTrading PIPING HAS A VAST ARRAY OF MILL-RUN DELIVERIES AND INVENTORY OF DUPLEX / SUPER DUPLEX PIPES, FITTINGS, FLANGES, AND RELATED PRODUCTS. We
Dash Trading PIPING HAS A VAST ARRAY OF MILL-RUN DELIVERIES AND INVENTORY OF CHROME ALLOY PIPES, FITTINGS, FLANGES, AND RELATED PRODUCTS. We provide the
Dash Trading PIPING HAS A VAST ARRAY OF MILL-RUN DELIVERIES AND INVENTORY OF SPECIALITY METALS PIPES, FITTINGS, FLANGES, AND RELATED PRODUCTS. We provide the most reliable
Project Management Dash Trading Piping can support the project in Piping materials supply from the 1st Material take-off (long lead items) until the site requirements (urgent

Need help or have a question?

UAE:
+971508692438
INDIA:
+919825164743