DASHPROJECTS offers one of the most comprehensive Pre-engineered steel buildings-PEB product portfolios globally, with applications in major market segments including heavy industry, infrastructure,
PRIMARY MEMBERS / MAIN FRAMES
Primary members are the main load carrying and support members of a pre-engineered building. The main frame members include columns, rafters and other supporting members. The shape and size of these members vary based on the application and requirements. The frame is erected by bolting the end plates of connecting sections together. All the steel sections and welded plate members are designed in accordance with the applicable sections as per the latest international codes and standards such as AISC, AISI, MBMA and IS to meet all the customer specifications.
LEAN TO (L-TO)
| SPAN |
3
8 3m to 18m
|
 |
SPACE SAVER (SV)
| SPAN |
6
8 6m to 18m
|
 |
L CANOPY (L-CAN)
| SPAN |
3
6 3m to 6m
|
 |
BUTTERFLY CANOPY (T-CAN)
| SPAN |
6
12 6m to 12m
|
 |
SINGLE SLOPE
| SPAN |
6
18 6m to 18m
|
 |
RIGID FRAME (RF)
| SPAN |
6
96 6m to 96m
|
 |
BEAM & COLUMN (BC-1)
| SPAN |
24
48 24m to 48m
|
 |
BEAM & COLUMN (BC-2)
| SPAN |
36
72 36m to 72m
|
 |
BEAM & COLUMN (BC-3)
| SPAN |
48
96 48m to 96m
|
 |
MULTI SPAN (MS)
| SPAN |
24
120 24m to 120m
|
  |
CRANE BEAMS
Crane Beams are support members for different type of cranes and allow for unobstructed movement of cranes along the building length. These crane beams are supported on the columns of a building.
MEZZANINE SYSTEMS
Standard mezzanine system consists of profiled steel deck, mezzanine joists, built-up beams and intermediate support columns. Built-up beams span in lateral directions and mezzanine joists in longitudinal directions bolted to the top flange of beams. A concrete slab is cast on the steel deck as a finished surface. Steel checkered plates can also be used as top surface.
TRUSSES
DASH Truss System is one of the company’s most popular and highly economical products. It is a rigid structure, ideal for large span roof systems, multiple bay buildings and as mezzanine floor framing. These structures are individually designed to meet the specific requirements of each building and are fabricated utilizing high quality efficient fixtures. The system allows for easy erection as all connections are field bolted except for field splices on very large spans, no site welding is required.
There is possibility of significant reduction in clearances and building heights by running service pipes/ducts through the trusses. Foundation costs are also reduced due to fewer columns being required to support larger spans.
CURVED MEMBERS (SEGMENTAL OR CONTINUOUS)
DASH provides curved sections with variable depth and tapered members and capability of providing the curvature in three dimensions.
FASCIAS AND CANOPIES
DASH provides various types of fascias specially designed as per the customer’s requirements. These can be either vertical, horizontal or with curved sheeting to enhance the architectural look of the building. Wall canopies at eaves, endwall, over doors and windows are also provided based on the requirement.
DASHPROJECTS Pre-Engineered Steel Buildings (PEB)
The main components of a PEB are built up at the plant with strict adherence to the carefully engineered design and according to the
The PEB (Pre-Engineered Building) concept or the Metal Building System was first developed in the USA after World War II, as one of the solutions for the increasing
For a comparison of Pre Engineered Steel Buildings and Conventional Steel Buildings, please click on the below image:
PEB vs
DASHPROJECTS produces sandwich panels in 6 thicknesses: 35 mm, 50 mm, 75 mm, 100 mm, 125 mm and 150 mm, with an excellent slip joint connection for structural strength and weather
The structural steel division at DASHPROJECTS has the capability and capacity to supply structural steel buildings for selected types of projects, including (but not limited to):
Any metal building system, no matter how well designed, may become a continuous source of problems if installed incorrectly. Erection of metal buildings is a specialized field in which
At DASHPROJECTS, our commitment is to always provide:
The fastest response to a request for quotation
The most competitive prices
Proposal drawings to help visualize your
Frames in PEB are mainly rigid frames – comprise of Taper Columns & Rafters, are built using the state of art technology. Splices plates are welded to the ends of the tapered
SSIPL HI-RIB Sheet Profile
Metals panels are the most attractive features of Metal Building System, having contributed mightily for the growing popularity of the Metal Buildings. The term
SSIPL Standing Seam Roof System - SSR 600
Standing Seam blends the aesthetics of an architectural panel with the strength of a structural panel. These panels have a good uplifts ratings assuring
Insulated Roof and wall Cladding
Heating or cooling is one of the largest operating expense in a building. That's why it is important that each building has good thermal insulation adapted for
When Crane System is required, SSIPL supply includes Columns, Rafters, Brackets, Crane runway beams & lateral tie that support crane system. Clients have to provide complete crane data
The standard mezzanine framing system consists of a steel deck support by joists into main mezzanine beams. If required by design loads, the main beams shall also be supported by
Typical Root Platform
Section of Typical Root Platform
Single Flight Staircase
Elevation: Single Flight Staircase with Mid-Landing
Plan: Single Flight Staircase with Mid-Landing
Double Flight Staircase
Isometric : Curved Eaves
Roof Extension at Eave (without Soffit)
Roof Extension at Eave (with Soffit)
Canopy with Curved Eaves with Bottom
Fascia System
Flush Fascias with Eave Gutter
Typical Sidewall Section forFlush FasciaTypical Endwall Section forFlush Fascia
Jack Beams are used to make economical as well as safe approach for creating longer bay length when large unobstructed space, is required. Common bay lengths (5,6,7,8,9 & 10) can be
Standard Trims & Flashing
Gable Trim (GT1)
Eave Gutter (GU1)
Eave Trim (ET1)Single Ridgecap (SRC-1)
Ridgevent System
S-Type Louver Detail
Roof Monitor
Turbovent Fixing Detail
Gutter / Downspout Fixing To Wallpanel Using
Described in few words, pre-engineered buildings are ideal for any non-residential low-rise building. Applications of pre-engineered buildings are numerous. Browse through our library
Purlins, girts and eave struts are secondary structural members used to support the wall and roof panels. Purlins are used on the roof; girts are used on the walls and eave struts are used at the
DashProjects offers a complete line of Wall/Roof panels, panel related accessories, trims, purlins, girt, eave gutters, downspouts, curved eaves, wall flashings and louvers for a wide range of
The panels used in the construction of DashProjects Pre-Engineered Buildings are composed of the following:
Base metal of either Galvalume coated steel conforming to ASTM A 792M Grade 345B or
Liner panels have one metal skin surface with polystyrene foam board adhered to it for better insulation. In the past 20 years, end-users, contractors and consultants have become increasingly aware
Drawings
DASHPROJECTS produces its own shop drawings for the fabrication of your steel joists, trusses, structural steel components, steel deck and girts. For project design, bid preparation or
Open web steel joist (OWSJ) is a lightweight steel truss consisting, in the standard form, of parallel chords and a triangulated web system, proportioned to span between bearing points.
The main use
Steel deck is a cold formed corrugated steel sheet supported by steel joists or beams. It is used to support concrete or insulating membrane of a roof.
DASHPROJECTS decks are based on load
Combining DASHPROJECTS joists with poured concrete, the system consists of hybrid concrete/steel T-beams running in one direction and an integrated continuous slab in the other (see drawing below).
The success of any project involving steel-intensive construction is dictated by the efficiency in erection of the structural steelwork. With a proven track record in regards to safety, our
Secondary structural framing refers to purlins, girts, eave struts, wind bracing, flange bracing, base angles, clips and other miscellaneous structural parts.
Purlins, girts and eave struts are cold
ROOF & WALL (AVAILABLE IN ALL REGIONS)
DASH standard steel panels are 0.5 mm or 0.6 mm thick and have a minimum yield strength of 345 MPa. Steel
In addition to the supply of steel building structures, DASHPROJECTS offers erection services through its authorized builders.
There are over 300 DASHPROJECTS certified builders worldwide. They have
Steel exhibits desirable physical properties that make it one of the most versatile structural materials. Some of its properties such as strength, uniformity, light weight, ease of use, etc., make it
STEEL VS CONCRETE
Evluation Criteria
Peb Building
Concrete Building
Steel Advantage
Building Dimensions
Suitable for spans 20-30m. Can sustain much larger spans.
When it comes to fit out, no one has a better track record than DASHPROJECTS. But we’ve never been much for resting on our laurels.
When it comes to professional
Great technology is no longer an afterthought. We believe all work environments are technology environments.
We believe all business environments are technology
When it comes to construction, our vision is our customer's vision. We drive dynamic solutions to reach exceptional results.
When it comes to construction, our vision
DASH PROJECTS Central Engineering Department is located in DUBAI UAE
Our engineering department is composed of 2 sections; Steel Design section & Steel Detailing section.
DASH
DASHPROJECTS (DASH) owns several factories to fabricate structural steel, Pre-engineered Buildings and material handling systems. These factories are located in Egypt, Syria and UAE .
Our factories
In DASHPROJECTS (DASH), the project management team, selected and led by the project manager, is responsible for coordinating and integrating activities across multiple functional lines:
A-The
Erection / installation of the company’s projects are implemented by developing the erection method statement considering the complexity of the Job, project schedule, site logistics,
Pre-engineered steel buildings can be fitted with different structural accessories including mezzanine floors, canopies, fascia, interior partitions etc. and the building is made water proof by use
DASHPROJECTS Structural Steel business unit had executed different categories of projects such as Industrial buildings, Airports terminals, Airport Hangers, warehouses, sport complex,
Structural steel and plate construction associated with crusher plants, cement factories, batching plants, block factories and sorting plants to be used as rock box hoppers, silos, chutes, conveyors