Building Accessories

Building Accessories

Building Accessories and special buyouts (SBO’s)include sliding doors, rollup doors, personnel doors, fiberglass insulation, sandtrap louvers, windows, ridges ventilators. Some are produced in-house. Some are purchased from suppliers and included in our single source supply.

Insulation
  • Insulation is typically fiberglass blanket of stable and uniformly textured inorganic glass fiber bonded together by a non-water soluble and fire retardant thermosetting resin.
  • Standard insulation thickness is 50 mm; higher thicknesses (75 mm and 100 mm) are available upon request.
  • Standard insulation facing is White Metalized Scrim Kraft (WMSK).
  • The standard nominal insulation density shall be 12 kg/m3 with a thermal conductivity of 0.041 w/mk at mean temperature of 25 0C. Higher densities (16 kg/m3 and 24 kg/ m3) are available upon request.
Personnel Doors
  • The frames of horizontal steel sliding doors are manufactured from 1.5 or 2.0 mm (nominal) thick x 200 mm deep cold formed channels and are delivered knocked down packages for field assembly are provided.
Steel Sliding Doors
  • The frames of horizontal steel sliding doors are manufactured from 1.5 or 2.0 mm (nominal) thick x 200 mm deep cold formed channels and are delivered knocked down packages for field assembly are provided.
Steel Roll-Up Doors
  • The roll-up door curtain is cold formed from variable thickness white polyester painted galvanized steel. The bottom rail of the door curtain is an extruded aluminum angle guide.
  • Standard Roll-Up Door Sizes are 3000 x 3000, 4000 x 4000, 5000 x 5000 and 6000 x 6000. In between sizes can be accommodated.
Windows
  • Window frames are made of powder coated aluminum extrusions in Frost White color only. They are horizontal half slide type (fixed type is optional), 1000 mm high and 1000 mm wide (other sizes are optional). Windows are factory glazed with 6mm thick clear glass and are equipped with latches and removable insect screens.
Sand Trap Louvers
  • Standard sand trap louvers are 1000 mm wide x 1000 mm high (other sizes are optional). They are supplied with vanes and framing. They are made from 0.7 mm (nominal) polyester painted Aluzinc Coated Steel sheet in any Mabani Steel Standard Colors.
Gravity Ventilators
  • Gravity ridge ventilators are 3000 mm long with a throat opening of 300 mm or 600 mm. 300 mm (throat opening) ventilators are equipped with dampers and are available in fresh White color only. 600 mm (throat opening) ventilators are supplied without dampers and are available in any standard Mabani Steel Color. Ventilators are installed as either individual units or as continuous (joined) units. The outer skin of both types of ventilators is made from 0.7 mm thick polyester painted Aluzinc Coated Steel. Both sizes are supplied with bird screens and shipped knocked down.
Fiber Glass Roof Curbs
  • Roof curbs are made of 3 mm thick fiberglass reinforced polyester and coated with a weathering surface on the outside face.
DASHPROJECTS provides top-of-the-line structural steel fabrication services. DASHPROJECTS works with the best designers and engineers to ensure that all projects meet high standards of excellence and
The components of a Pre-engineered building (PEB) are manufactured at our plant according to the carefully engineered design, drawn as per the client’s specific project requirements. This
Cladding DASH is one of the largest manufacturers of cold-rolled steel frame structures in the Middle East. We offer a wide range of panels and profiles to suit the industrial and commercial needs
The engineering section employs a team of design and detailing engineers equipped with the latest and most advanced software for both disciplines. All works are closely monitored to ensure that it
Steel Fabrication DashProjects is one of the leading steel fabrication company in Dubai. We deliver experienced and dependable steel manufacturing and fabrication solutions for clients
  Steel Erection With over a decade of experience and a team of industry experts, ASSENT is a trusted Steel Erection Company in Dubai, UAE. We aim to provide a complete,
STRUCTURAL STEEL Industrial Structures and Buildings. Its design capacity, its substantial resources, its considerable output, its commitment to service make Dash Projects a choice supplier for
Pre-engineered buildings are defined by the following geometrical parameters: Building width, Length, Eave height, Roof slope, Sidewall bay spacing, end wall bay spacing and main frame module space.
Mezzanine A mezzanine is an elevated floor for use as office or store area. The mezzanine framing is connected to main frame and intermediate columns for support. The mezzanine framing consists of
Dash Projects offers profile to suit structural, architectural, thermal lighting and corrosive circumstances. Structural constraints are satisfied by the range of corrugation spacing, thickness and
Dash Projects also offers steel deck for steel buildings or mezzanines to suit structural specifications. There are two profiles available in Dash Projects production line; they are Dash Projects
Dash Projects offers fabrication and supply of crane bridge girders for over head cranes. Most girders are from plate formed box section. Dash Projects plant is well equipped with advance fabrication
DASH Projects is capable of designing all kind of high complex steel structures such as high rise buildings, airport terminal buildings and industrial structures for process, petroleum and power
DASH  has developed an excellent reputation and strong presence as one of the regional’s premier steel fabricator and erector. Our research and development team are striving to deliver
BUILDING     General  Contracting In normal traditional engagement for project deliverables in the construction industry where the Owner engages the Designer and Contractor
CIVIL & INFRASTRUCTURE     (Dash Projects ) Infrastructure Division has been operating in the region since 2012, in these 6 years the division has added significant strength to the
MEP SERVICES     Dash Projects  Mechanical, Electrical and Plumbing (MEP) division has been operating in UAE since 2012 along with the core DASH’s building sector. The MEP
The unit of measure of hot rolled structures (structural steel) is the metric ton (MT). Hot Rolled Steel Structures applications include Multi Storey low rise buildings, equipment supporting
Dash Trading  has  erection team is comprises of highly qualified and well trained site engineers and safety officers. The team has completed more than 500 projects in the GCC, Meddle &
Mabani state of the art blasting, painting & material handling system produce the highest quality with most enduring coating finish. Mabani has the most advanced and precise surface preparation
 Described in few words, pre-engineered buildings are ideal for any non-residential low-rise building. Applications of pre-engineered buildings are numerous. Browse through our
World-class industrial performance requires a partnered supply chain of world-class vendors. To compete and win in markets with spiraling product performance, shrinking product life
With both extensive knowledge and experience in heavy steel fabrication, DASH Engineering can provide you with exactly what you are looking for. Having worked in an extensive

Need help or have a question?

UAE:
+971508692438
INDIA:
+919825164743