DASHPROJECTS provides top-of-the-line structural steel fabrication services. DASHPROJECTS works with the best designers and engineers to ensure that all projects meet high standards of excellence and
Steel decking
Dash Projects also offers steel deck for steel buildings or mezzanines to suit structural specifications. There are two profiles available in Dash Projects production line; they are Dash Projects 50X225 and Dash Projects 75X300 with covering width of 900mm.
Low trough decking panel Dash Projects 50X225
Thickness : 0.43 mm and 0.60 mm
Coating : Mill finish
Material Specification : Aluzinc sheeting (ASTM A792M GR.50) Galvanized sheeting (ASTM A653 GR.50)
Section Properties per meter width
Calculations are based on a minimum yield stress of 345 N/mm² (50 KSI)
Thickness refers to metal core (Base Metal Thickness BMT)
Allowable Load (KN/m²)
Note:
The allowable loads are due to bending strength or deflection limited of span/200.
All stated allowable loads are to include SWT of decking and concrete.
High trough decking panel Dash Projects 75X300
Thickness : 0.80 mm and 1.0 mm and 1.2 mm
Coating : Mill finish
Material Specification : Galvanization to G90 (ASTM A653M-95) Steel Grade SQ-50 (ASTM A653M-95)
Section Properties per meter width
Calculations are based on a minimum yield stress of 345 N/mm² (50 KSI)
Thickness refers to metal core (Base Metal Thickness BMT)
Allowable Load (KN/m²)
Note:
The allowable loads are due to bending strength or deflection limited of span/200.
All stated allowable loads are to include SWT of decking and concrete.
SPECIFICATIONS
Design Codes
Hot-rolled structural steel is designed in accordance with AISC or British standard BS 5950.
Built-up frames and other welded members are designed in accordance with the American Institute of Steel Construction AISC “specification for Design, Fabrication and erection of structural Steel Buildings.
All welding conform to the requirements of American Welding Society.
Light Gauge Cold-formed members are designed in accordance with the requirements of the American iron and Steel Institute “Specifications of the Design of Light Gauge Cold-Formed Steel Structural Members”.
Design Loads
Structures are designed to withstand the dead load and:
- Live Load
- Prescribed wind load
- Collateral Load and
- Equipment Loads
The design procedures follow the Metal Building Manufacturer’s Association “Low Rise Building Systems Manual”.
Material Specification
Hot rolled sections are fabricated from material having a minimum yield stress of 345 N/mm2 (50 ksi) conforming to ASTM A-572 or minimum yield 275N/mm2 conforming to EN10025 S 275.
Flange and Web material for built-up sections, connection plates and stiffeners are fabricated from material having a minimum yield stress of 345 N/mm2 (50ksi) conforming to ASTM A572 Grade 50.
All galvanized light gauge cold-formed structural members are fabricated from steel coil having minimum yield stress of 365 N/mm2 with a galvanized coating of 275 g/m2 conforming to JIS G3302 SGH490.
Aluminum Zinc coated steel and pre-painted Galvanized coated steel sheeting, eave Gutter, downspout, Flashing and Trims have a minimum yield strength of 345 N/mm2 (50ksi) with approximately 55% aluminum and 45% zinc alloy coating of 150g/m2 (total on both sides), conforming to ASTM A-792 Grade -50B.
Galvanized coated steel and pre-painted Galvanized coated steel sheeting, Eave Gutter, Downspout, Flashing and trims have a minimum yield strength of 345 N/mm2 (50ksi) with a ‘galvanized coating’ of 275 g/m2 conforming to ASTM A-653 Grade-50.
Aluminum and pre-painted Aluminum Sheeting, Eave Gutter, Downspout, Flashing and Trims have minimum yield strength of 180 N/mm2 (30ksi) conforming to Aa-3105-H16.
High tensile bolts conform to the requirements of ASTM A-325.
Diagonal brace rods and anchor bolts have minimum yield strength of 345 N/mm2 (50ksi) conforming to ASTM A-572 Grade-50.
The components of a Pre-engineered building (PEB) are manufactured at our plant according to the carefully engineered design, drawn as per the client’s specific project requirements. This
Cladding
DASH is one of the largest manufacturers of cold-rolled steel frame structures in the Middle East. We offer a wide range of panels and profiles to suit the industrial and commercial needs
The engineering section employs a team of design and detailing engineers equipped with the latest and most advanced software for both disciplines. All works are closely monitored to ensure that it
Steel Fabrication
DashProjects is one of the leading steel fabrication company in Dubai. We deliver experienced and dependable steel manufacturing and fabrication solutions for clients
Steel Erection
With over a decade of experience and a team of industry experts, ASSENT is a trusted Steel Erection Company in Dubai, UAE. We aim to provide a complete,
STRUCTURAL STEEL
Industrial Structures and Buildings.
Its design capacity, its substantial resources, its considerable output, its commitment to service make Dash Projects a choice supplier for
Pre-engineered buildings are defined by the following geometrical parameters: Building width, Length, Eave height, Roof slope, Sidewall bay spacing, end wall bay spacing and main frame module space.
Mezzanine
A mezzanine is an elevated floor for use as office or store area. The mezzanine framing is connected to main frame and intermediate columns for support. The mezzanine framing consists of
Dash Projects offers profile to suit structural, architectural, thermal lighting and corrosive circumstances. Structural constraints are satisfied by the range of corrugation spacing, thickness and
Dash Projects offers fabrication and supply of crane bridge girders for over head cranes. Most girders are from plate formed box section. Dash Projects plant is well equipped with advance fabrication
DASH Projects is capable of designing all kind of high complex steel structures such as high rise buildings, airport terminal buildings and industrial structures for process, petroleum and power
DASH has developed an excellent reputation and strong presence as one of the regional’s premier steel fabricator and erector. Our research and development team are striving to deliver
BUILDING
General Contracting
In normal traditional engagement for project deliverables in the construction industry where the Owner engages the Designer and Contractor
CIVIL & INFRASTRUCTURE
(Dash Projects ) Infrastructure Division has been operating in the region since 2012, in these 6 years the division has added significant strength to the
MEP SERVICES
Dash Projects Mechanical, Electrical and Plumbing (MEP) division has been operating in UAE since 2012 along with the core DASH’s building sector.
The MEP
The PEB Steel Structure of a Pre-Engineered Steel Building generally accounts for over 80% of the weight of the Pre-Engineered Steel Building. This 80% is an average and may change
The unit of measure of hot rolled structures (structural steel) is the metric ton (MT). Hot Rolled Steel Structures applications include Multi Storey low rise buildings, equipment supporting
Building Accessories and special buyouts (SBO’s)include sliding doors, rollup doors, personnel doors, fiberglass insulation, sandtrap louvers, windows, ridges ventilators. Some are
Dash Trading has erection team is comprises of highly qualified and well trained site engineers and safety officers. The team has completed more than 500 projects in the GCC, Meddle &
Mabani state of the art blasting, painting & material handling system produce the highest quality with most enduring coating finish. Mabani has the most advanced and precise surface preparation
Described in few words, pre-engineered buildings are ideal for any non-residential low-rise building. Applications of pre-engineered buildings are numerous. Browse through our
World-class industrial performance requires a partnered supply chain of world-class vendors. To compete and win in markets with spiraling product performance, shrinking product life
With both extensive knowledge and experience in heavy steel fabrication, DASH Engineering can provide you with exactly what you are looking for. Having worked in an extensive